• The difference between injection moulding and 3D printing

    The difference between injection moulding and 3D printing

    For some manufacturers, they may be able to run over one thousand different engineering materials through injection moulding.Whether it is glass fillers or some of the other materials that can be achieved. Injection moulding may be more suitable than 3D printing. This is a process and method that cu... read more

    Mar 30,2018 Industry News
  • Increasing demand for Plastic Injection Moulds

    Increasing demand for Plastic Injection Moulds

    Stuffs used for injection moulding may range from plastics to metals as well as other modern materials. Most plastic parts are created by injection moulding. What are the advantages of Plastic Injection Moulds? Injection moulding can be used for mass production and small batch production.In addition... read more

    Mar 23,2018 Industry News
  • How to mount a mould in moulding machine

    How to mount a mould in moulding machine

    First,make sure that the mould will cover at least seventy percent of the distance between the tiebars.Pay attention to the following items: 1.This is a good rule of thumb. Most machine manuals will specify the minimum mould size for a given machine. Some machines even have placards mounted on the f... read more

    Mar 16,2018 Industry News
  • Solution to common problems of die top rod waterway

    Solution to common problems of die top rod waterway

    The top rod will bend, break, and so on. The quality of the self-made top rod is better, but the processing cost is high. Now the mould structure is generally used in standard parts, and the quality is at the normal level. If the gap top rod and the guide hole is too large, there will be leakage; bu... read more

    Mar 06,2018 Industry News
  • Plastic mold heat treatment problems

    Plastic mold heat treatment problems

        Die heat treatment is an important means to enhance the hardness of steel, usually after the mold is opened thick, heat treatment back and then finishing, but the process is also there is a risk, improper handling can cause cracks in steel and Scrap, then what is the reason Plastic mold steel ab... read more

    Feb 28,2018 Industry News